Wireless webcam - with pinhole spy camera   2.4GHz with audio.

Order No. 820G

(cameras compatible with the above kit- motion detection will not function with multiple cameras as the receiver cycles)

All 2.4 GHz receivers have 4 channels.  For compatibility only the cameras on the right are guaranteed to be compatible with the receiver above:

Wireless webcam - with night and colour day CCTV 2.4GHz camera with audio.

Order No. 812G

(cameras compatible with the above kit)

All 2.4 GHz receivers have 4 channels.  For compatibility only the cameras on the right are guaranteed to be compatible with the receiver above:

Wireless webcam - with pinhole bullet spy camera  with built in Lithium battery! 2.4GHz with audio.

Order No. 830G

(cameras compatible with the above kit)

All 2.4 GHz receivers have 4 channels.  For compatibility only the cameras on the right are guaranteed to be compatible with the receiver above:

Wireless webcam - with bullet wide  lens camera night vision and colour day with built in Lithium battery! 2.4GHz with audio.

Order No. 840G

(cameras compatible with the above kit)

All 2.4 GHz receivers have 4 channels.  For compatibility only the cameras on the right are guaranteed to be compatible with the receiver above:

Wireless webcam - with pinhole bullet spy camera night vision and colour day with built in Lithium battery! 2.4GHz with audio.

Order No. 841G

(cameras compatible with the above kit)

All 2.4 GHz receivers have 4 channels.  For compatibility only the cameras on the right are guaranteed to be compatible with the receiver above:

Wireless webcam - night 27 LED and day CCD wireless CCTV security camera/s  with audio.

Order No. 906G

(cameras compatible with the above kit)

All 2.4 GHz receivers have 4 channels.  For compatibility only the cameras on the right are guaranteed to be compatible with the receiver above:

USB 2.0 DVR

Connect any CCTV or wireless camera kits into the plug and play USB 2.0 DVR - record to your laptop/desktop/e-mail alert, quad, motion detection, view on network online and more - add 1 to 4 wired or complete wireless kits, any model, any frequency.

Order No. E-240418

Up to 4 wireless cameras at the same time on one TV or PC.  Our new Quad Multiplex Receiver will do just that.  Connect to your standard TV or monitor to use as a quad receiver and multiplexor or connect to your computer via USB and record video with the security software included.  Purchase up to 4 cameras from the below table.

-USB2.0 support connect PC, a single synchronous recording or four camera signals
-Standard A/V connect to tv/monitor as a quad multiplexor
-2.4GHz Wireless receiver & QUAD SYSTEM
-4-Channel receiving at the same time
-Four pictures, two pictures, single pictures
-PIP(picture in picture) automatic inverting mode
-High performance picture frozen function High performance picture amplifying function.

Specification:
-System: PAL/NTSC
-Receiving Frequency: CHl:2414MHz,CH2:2432MHz CH3:2450MHz,CH4:2468MHz
-Power Supply: 12V 1.2A
-Current Consumption: 700mA
-Receiving Sensitivity: -88dBm
-Antenna Input Impedance: 75 ohm
-Video Output Level: lVp-p
-Audio Output Level: lVp-p
-Image Resolution : 720X760(PAL)  720X800(NTSC)
-Image Refresh Rate: 60Hz/second(NTSC)50Hz/second(PAL)
-Video Output Type Single picture, two picture, PIP,POP or four picture can be displayed and switched automatically

Vista Driver Download

Order No. RM-1060S

Extremely simple plug and play high quality DVR system through USB 2.0.  For all laptop or desktop windows based computers.

4 Video channel input - connect up to 4 CCTV cameras wired or wireless. Up to 2 units can be installed on a single laptop/pc to provide 8 channels DVR.

Motion detect, e-mail alert, alarm, date/time stamp, password, user access select, network/internet access, PTZ/zoom (depends on camera) and much more.  Fully functional high quality DVR recorder.

Records 4 channels simultaneously.

View online or over a network.  Can access cameras through the internet/network/pre-programmed phone/FAX or e-mail with image via a CCC server. 

 For example connect to 1 to 4 of our:

2.4Ghz kits or CCTV cameras

◆Specification
USB 2.0 mobile DVR
4 channels of video input
Supports DDNS. No Fix IP needed
Supports CCC (Central Control Center) to remote monitor
Remote Control Functions through Browser, Dial-up, CCC Player, & Mobile phone
Supports monitoring and recording resolution
Multi-language supported
Independent set motion detection area
Sensitivity and recording rate for each camera
Watermark on video file to prevent from being altered
Continuous record mode, motion detect record, schedule, alarm and time lapse record
Different alarm sound selections
Changeable user interface
Can save live video to local host via CCC Player
Notify pre-programmed FAX, FTP & E-Mail alarm notice (with image included)
Independent channel video adjustment: Hue/contrast/U/V Saturation/Brightness
NTSC: 320 x 240 resolutions
PAL: 352 x 288 resolutions
MPEG-4/M-JPEG video compression
30 second pre/post recording settings
NTSC: 1 - 30 frames/sec video recording speed for each camera
PAL: 1 - 25 frames/sec video recording speed for each camera
NTSC: 60 frames/sec display and record rate
PAL: 50 frames/sec display and record rate
Unit Dimensions:
0.75 x 3 x 5-inches (H x W x D)
Regulatory Approvals: FCC and CE
 

IP CCTV Cameras - with CCTV software: cameras that plug direct to an internet connection and can be viewed accessed from anywhere in the world - more complex than the above plug and play kits however they don't need to go through a p.c

Order No. IP2032A

Ultra Mini IP camera with night vision (37x75x51mm - size of the palm of your hand) with software Icamview and Multiview and accessories. 

This is the smallest IP camera we can find, built in IP web server (no need for a computer to function just a phone/broadband/adsl/network), you can set motion detection, schedule record and e-mail alert and remote access from anywhere in the world! from the world wide web.  Also has two LEDs which provide 3 meters night vision, catch the storeroom thief, who's trespassing while your on holiday , taking from the till or just keep an eye on your home.

1) Supports up to 30 remote viewers per camera
2) Creates up to 8 user accounts with different access levels (administrator,
operator and viewer)
3) Configured with up to 4 permit hours per user account
4) Controls FPS allocated to each user account and USB camera
5) MJPEG compression
6) USB1.1 and 2.0 compliant
7) Web-based remote access using any Java enable web browser
8) 10/100Mbps fast Ethernet connection
9) Motion detection, continuous or scheduled
10) Scheduled image recording
11) Email notification of events
12) Option to store images to an FTP server
13) Block / black-list up to 256 IP addresses
14) Detailed event log with ability to sort and save
15) Free multi-camera monitoring software
16) Free iCAMView utility software
17) Frame rate: up to 20fps in 320 x 240
18) Motion tracking: color 1/3" format
19) 380k pixels, VGA (640 x 480), CIF (352 x 288)
20) Frame: VGA 20fps
21) Illumination: 5.0 lux/F2.0
22) Focus: F=2.0/4 glass, 1 filter/fl=6.0mm
23) Angle: 60°
24) Focus: 30cm - infinity
25) Auto exposure
26) Auto: white balance
27) S/B: >48dB
28) Interface: RJ45 and DC power
29) Power supply: DC 5.3V/1A 100 - 240V

Order No. IP2 (includes camera, usb cable and IP icam box )

IP cameras connect direct to the network internet, providing streaming video from anywhere in the world.  All you need is a good speed broadband/adsl line to be able to watch full speed 30fps video (equivalent to VHS video) from the camera location anywhere in the world, simply by typing in the IP address of the camera and logging on.  Remote control the camera with pan/tilt function through the password protected IP address.

Standard Specification of Packaged USB Camera
VIMICRO ZC0301 Plus processor inside.
Color CMOS VGA sensor with 350,000 pixels.
MJPEG compression.
Up to 30 frames per second.
USB Interface, reverse compliant with USB 1.1 specifications.
Focus Distance: 5cm to infinity, manually adjustable Focus Lens.
Minimum illumination: 2.5 lux @f1.4
Visual angle: 51/60 degree horizontal.
Auto Control for White balance, Exposure, Color/Brightness.
Operating Temperature: 0C to +40C.

Please note its wired not wireless.  Just connect the power and broadband/adsl cable/network cable

UP to 30 FPS Performs High Quality Service to Multiple Users

Features
Easy installation for users of all levels with iCAMView Utility (a step-by-step installation wizard).
View images from your web enabled PDA.
Monitor multiple IPCamera using iMultiView (a Windows based freeware) when you make a purchase.
Flexible Motion Detection and Image Recording functions.
Email notification for Motion Detection, daily report, etc...
Configure up to 4 viewing time frames (Permit Hours).
Able to display multiple images on a single screen.
Support up to 30 simultaneous remote viewers per USB camera.
Display viewer's IP, account, viewed camera, login time and total downloaded bytes.
Detailed event log with listing options.
Detailed event log with listing options.
Event listing by Level and Type.
Limit the max FPS to each of the 8 user account.
Number of Viewers control per USB camera (max of 30 viewers/camera)
Block / black-list up to 256 IP addresses from accessing IPCamera.
Schedule up to four time slots when motion detection is active.
Upload motion detected images to a specified FTP server.
Schedule up to two time slots for image forwarding (to email or FTP server).
Update firmware directly from IPCamera webpage.
Save current settings to a file making settings recall easy.

Order No. NC1000

NC1000 Night Vision IP /Network camera features a standalone system, which means a camera and a computer combined in a small package. Built-in A/V encoder module and web server provide users     to view images through IP network (LAN) with a browser on any computer connected to network. And it can be installed easily and friendly by using a IP configuration software to assign an IP to your IP camera.

Includes snapshot/motion detection/FTP/e-mail alert and professional CCTV "secu vision" software for IP cameras

>Up to 30 FPS Performs High Quality Service to Multiple Users                                                                                           >Motion Detection Supports Upload Images to FTP & EMAIL             >GPIO Enables External Trigger and Motion Alarm Output              >Built in Microphone Brings Users More Than Video Only                   >View with Browsers No Specific AP Needed                                       > Remote Record and Snapshot Control on Web

Camera
  -1/4 Inch Color CMOS 307,200 Pixel Sensor
  -640x480/320x240/352x288/176x144
  -2.5Lux / F1.4
  -Automatic Exposure Control (AEC)
  -Automatic Gain Control (AGC)
  -Automatic Brightness Control (ABC)
  -Automatic White Balance (AWB)
  -Electronic shutter: 1/60~1/15,000sec
  Lens
  -Standard C/CS Mount Type, 6.0mm, F1.8 Image
  -Image Frame Rate: Up to 30 Frame Per Second
  @ VGA, Up to 40 Frames Per Second @CIF
  -Compression: JPEG Image, MJPEG Video
  Video Quality Level: 5
  Resolution: 640x480, 320x240, 352x288, 176x144
  Audio Support
  -PCM / ADPCM
  Hardware
  -CPU: 32 Bits RISC Processor
  -One RJ-45 for 10/100 Fast Ethernet
  -IR LED (Option)
  -2Di / 1Do for User Define
  Protocols
  -TCP/IP, SMTP, HTTP, FTP, PPPoE, DHCP, DDNS
  Installation
  -Via Configuration S/W or Web Config
  System Requirements
  -Operation system: Windows 98/Me/NT/2000/XP, Linux, Mac
  -Browser: Microsoft IE5.x, 6.x or above, or Netscape
  Navigator 5.x or above
  User management
  Up to 20 Users Log in
  -2 Layers Username & Password Protection.
  GPIO & Trigger
  Support
  Motion Detect
  3 Level Sensitivity Detection
  -Alert / Record via E-Mail or FTP When Triggered
 

Order No. NC1200

NC1200 Night Vision IP /Network camera features a standalone system, which means a camera and a computer combined in a small package. Built-in A/V encoder module and web server provide users     to view images through IP network (LAN) or wireless IP network (WAN) with a browser on any computer connected to network. And it can be installed easily and friendly by using a IP configuration software to assign an IP to your IP camera.

Both WAN and LAN:

WAN - WiFi IEEE 802.11b/g (W10) wireless network function; if you have a wireless router

LAN - wired network function; if you have a wired router

Includes snapshot/motion detection/FTP/e-mail alert and professional CCTV "secu vision" software for IP cameras

>Up to 25 FPS Performs High Quality Service to Multiple Users                                                                                           >Motion Detection Supports Upload Images to FTP & EMAIL             >GPIO Enables External Trigger and Motion Alarm Output              >Built in Microphone Brings Users More Than Video Only                   >View with Browsers No Specific AP Needed                                       > Remote Record and Snapshot Control on Web

Camera
  -1/4 Inch Color CMOS 307,200 Pixel Sensor
  -640x480/320x240/352x288/176x144
  -2.5Lux / F1.4
  -Automatic Exposure Control (AEC)
  -Automatic Gain Control (AGC)
  -Automatic Brightness Control (ABC)
  -Automatic White Balance (AWB)
  -Electronic shutter: 1/60~1/15,000sec
  Lens
  -Standard C/CS Mount Type, 6.0mm, F1.8 Image
  -Image Frame Rate: Up to 25 Frame Per Second
  @ VGA, Up to 40 Frames Per Second @CIF
  -Compression: JPEG Image, MJPEG Video
  Video Quality Level: 5
  Resolution: 640x480, 320x240, 352x288, 176x144
  Audio Support
  -PCM / ADPCM
  Hardware
  -CPU: 32 Bits RISC Processor
  -One RJ-45 for 10/100 Fast Ethernet
  -IR LED (Option)
  -2Di / 1Do for User Define
  Protocols
  -TCP/IP, SMTP, HTTP, FTP, PPPoE, DHCP, DDNS
  Installation
  -Via Configuration S/W or Web Config
  System Requirements
  -Operation system: Windows 98/Me/NT/2000/XP, Linux, Mac
  -Browser: Microsoft IE5.x, 6.x or above, or Netscape
  Navigator 5.x or above
  User management
  Up to 20 Users Log in
  -2 Layers Username & Password Protection.
  GPIO & Trigger
  Support
  Motion Detect
  3 Level Sensitivity Detection
  -Alert / Record via E-Mail or FTP When Triggered